 |
|
| 100W Single Output |
|
 AP-100-5 |
|
AP-100-7.5 |
|
| AP-100-12 |
|
AP-100-15 |
|
| AP-100-24 |
|
AP-100-48 |
|
|
|
| Características |
|
Low-cost, high reliability |
|
High efficiency, low working temp. |
|
Built in EMI filter, low ripple noise |
|
Compact size, light weight |
|
100% full load burn-in test |
|
International AC input selected |
|
Short circuit/over load protection |
|
| Type No | Output | Tol. | R & N | Effi. | | CK-100-5 | 5V, 20A | ±2 | 100mV | 76% | | CK-100-7.5 | 7.5V, 13.5A | ±1 | 125mV | 78% | | CK-100-12 | 12V, 8.5A | ±1 | 125mV | 80% | | CK-100-15 | 15V, 6.7A | ±1 | 125mV | 81% | | CK-100-24 | 24V, 4.5A | ±1 | 150mV | 83% | | CK-100-48 | 48V, 2.2A | ±1 | 150mV | 84% | | Input voltage | 90~132VAC / 180-264VAC selected by SW | | Input frequency | 47~63Hz | | Inrush current | Cold start, 30A/115V, 60A/230VAC | | Output voltage | Refer to above (±10% ADJ.) | | Overload protetion | 105% ~ 150% output pulsing mode | | Over voltage protection | 115% ~ 135% of output voltage | | Setup, rise, hold up time | 1s, 30ms, 15ms/230VAC | | Withstand voltage | I/P-O/P: 3KV, 1/P-FG: 1.5KV, 1 min. | | Working temp | 0~50°C@100%, -10°C@80%, 60°C@60% | | Safety Standard | Design refer to UL 1020 requirement | | Connection | 7P/9.5 mm terminal block |
|
|
|
|
|
|
©2005 Inc. de Tecnologia de CoolMax. Todos os direitos reservados. |
|
