You will need to reset the unit to clear the DEFAULT Storage Policy.
With hard drives:
Configure your switch accordingly. For first time user, we recommend JBOD configuration (you will see your drives (1 on, 2 off, 3 off).Turn on the unit; Immediately press and hold the reset button located at the bottom and beside the storage policy switch. The red led light will flash till it turns to solid green; Wait for 10 seconds then turn off the unit to take effect. Please follow further instructions in the manual.
No Hard drives:
Configure your switch accordingly. For first time user, we recommend JBOD configuration (you will see your drives (1 on, 2 off, 3 off).Turn on the unit; Immediately press and hold the reset button located at the bottom and beside the storage policy switch. The red led light will flash till it turns to solid red; Wait for 10 seconds then turn off to take effect. Insert your drive and you are set to JBOD. Please follow further instructions in the manual.
Mode Changes (any mode changes, unit will need a reset):
Turn off the unit and configure your new switch settings. Turn on the unit; Immediately press and hold the reset button located at the bottom and beside the storage policy switch. The red led light will flash till it turns to solid red; Wait for 10 seconds then turn off to take effect. Please follow further instructions in the manual.