For desktops, please use the Y-USB cable and connect both (2) USB into the port located at the rear of your PC; connect the other USB to the unit.
For notebooks, please use the Y-USB cable and connect both (2) USB into the port of your notebook. Connect the other USB to the unit.
Please refrain from using external USB hubs or other case USB ports (for PCs).
3.
Windows will detect and pre-install drivers automatically.
4.
Make sure hard drive is partitioned / formatted through disk management (for new drives).
5.
Older hard drives, please verify under disk management that your drive is partitioned / formatted. You may need to assign a new drive letter manually.
Note: Notebook or desktop units from proprietary companies like Compaq, Dell, HP, etc. may have security features that blocks detection of the drive when installed to other units or enclosures.
Products
