 |
|
| 60W Dual Output |
|
 APD-60A |
|
APD-60B |
|
| APID-60B |
|
|
|
| CARACTERISTICAS |
|
Certeza de bajo costo y alta |
|
La eficiencia alta, trabajando bajo temporero. |
|
Construyó en el filtro de EMI, el ruido bajo de onda |
|
Comprima el tamaño, enciende el peso |
|
100% de prueba repleta de quemadura-en de carga |
|
El cortocircuito sobre carga la protección |
|
|
| Type No | Output | Tol. | R & N | Effi. | | CKD-60A | 5V, 0.3-6A | ±2% | 75mV | 73% | | 12V, 0.2-4A | ±6% | 150mV | | CKD-60B | 5V, 0.3-6A | ±2% | 75mV | 76% | | 24V, 0.2-2.2A | ±5% | 150mV | | CKID-60B | Same spec. as APD-60B except the output is isolated | | Input voltage | 85~264VAC | | Input frequency | 47~63Hz | | Inrush current | Cold start, 25A/115V, 50A/230V | | Output voltage | Refer to above (CH1: +10%, -5% ADJ.) | | Over voltage protection | CH1: 5.75~6.75V of output voltage | | Overload protection | 105% ~ 150% output pulsing mode | | Setup, rise, hold up time | 800ms, 50ms, 10ms/115VAC | | 300ms, 50ms, 80ms/230VAC | | Withstand voltage | I/P-O/P: 3KV, 1/P-FG: 1.5KV, 1 min. | | Working temp | 0~45°C@100%, -10°C@80%, 60°C@60% | | Safety Standard | Design refer to UL 1012 requirement, UL 1950, TUV EN60950 requirement | | EMC Standard | Design refer to EN550022 class B, EN61000-4-2,3,4,5, EN60555-2,3 | | Connection | 7P/9.5mm pitch terminal block |
|
|
|
|
|
|
©2005 Tecnología de CoolMax S.a. Reservó bien. |
|
